Configuring PCB Embedded Board Array Object Properties in Altium NEXUS

Вы просматриваете версию 3.0. Для самой новой информации, перейдите на страницу Configuring PCB Embedded Board Array Object Properties in Altium NEXUS для версии 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent page: Embedded Board Array

PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Embedded Board Array object properties, or those that can logically be pre-defined, are available as editable default settings on the PCB Editor - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.

  • Post-placement settings – all Embedded Board Array object properties are available for editing in the Embedded Board Array dialog and the Properties panel when a placed Embedded Board Array is selected in the workspace.

​   

If the Double Click Runs Interactive Properties option is disabled (default) on the PCB Editor - Defaults page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open. 
While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly. 

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Location (Properties panel only)

The   icon to the right of this region must be displayed as   (unlocked) in order to access the below fields. Toggle the lock/unlock icon to change its lock status. 
  • (X/Y)
    • X (first field) - the current X (horizontal) coordinate of the reference point of the embedded board array, relative to the current workspace origin. Edit to change the X position of the embedded board array. The value can be entered in either metric or imperial, include the units when entering a value whose units are not the current default.
    • Y (second field) - The current Y (vertical) coordinate of the reference point of the embedded board array, relative to the current origin. Edit to change the Y position of the embedded board array. The value can be entered in either metric or imperial, include the units when entering a value whose units are not the current default. 
  • Rotation - the embedded array's angle of rotation (in degrees), measured counterclockwise from zero (the 3 o'clock horizontal). Use the drop-down to change the rotation of the embedded board array. The minimum angular increment is 90°.

Properties 

  • ​PCB Document - displays the path to the current reference PCB document that will be used to populate the array. Click  to browse for a different PCB document.
  • Column Count - displays the number of columns in the board array. Edit this field to define the number of columns in the array.
  • Row Count - displays the number of rows in the board array. Edit this field to define the number of rows in the array.
    • Mirrored - enable to horizontally mirror the board array.
    • Link Location to Embedded Board Origin - enable to reference the board array/panelization from the origin of the embedded board. Disable (default) to build the array based on the bottom left point of the objects in the referenced board's workspace.
  • Column Margin - displays the current column margin between edges of PCBs in the array. Values can be defined in either mm or mil units. To specify the units when entering a number, add the mm or mil suffix to the value.
  • Row Spacing - displays the current vertical pitch between PCBs in the array. The space between two adjacent boards is the pitch minus the height of one board. Edit this field to change the board pitch. Values can be defined in either mm or mil units. To specify the units when entering a number, add the mm or mil suffix to the value. 
  • Column Spacing - displays the current horizontal pitch between PCBs in the array. The space between two adjacent boards is the pitch minus the width of one board. Edit this field to change the board pitch. Values can be defined in either mm or mil units. To specify the units when entering a number, add the mm or mil suffix to the value. 
  • Row Margin - displays the current row margin between edges of PCBs in the array. Values can be defined in either mm or mil units. To specify the units when entering a number, add the mm or mil suffix to the value. 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content