Query_Lang-SCHFunctions_Fields_PinIeeeSymbolOuterEdgePinIeeeSymbolOuterEdge_AD

Вы просматриваете версию 2.0. Для самой новой информации, перейдите на страницу Query_Lang-SCHFunctions_Fields_PinIeeeSymbolOuterEdge((PinIeeeSymbolOuterEdge))_AD для версии 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Query Functions - Fields

Summary

Returns all pin objects whose IEEE Symbol Outside Edge property complies with the Query.

Syntax

PinIeeeSymbolOuterEdge = IeeeSymbolOuterEdge_String
PinIeeeSymbolOuterEdge <> IeeeSymbolOuterEdge_String

IeeeSymbolOuterEdge_String must be one of the following strings:

  • 'Active Low Input'
  • 'Active Low Output'
  • 'Dot'
  • 'No Symbol'

Example Usage

PinIeeeSymbolOuterEdge = 'Dot'
Returns all pin objects whose IEEE Symbol Outside Edge property is Dot.

PinIeeeSymbolOuterEdge <> 'Active Low Output'
Returns all objects except pin objects whose IEEE Symbol Outside Edge property is Active Low Output.

IsPin && PinIeeeSymbolOuterEdge <> 'No Symbol'
Returns all pin objects except those whose IEEE Symbol Outside Edge property is No Symbol.

Tips

  1. The single quote characters (') at the start and end of IeeeSymbolOuterEdge_String are mandatory.
  2. The IEEE Symbol Outside Edge property is only defined for pin objects.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.