Query_Lang-SCHFunctions_MembershipChecks_Object_IeeeSymbolOuterEdgeObject_IeeeSymbolOuterEdge_AD

Вы просматриваете версию 2.0. Для самой новой информации, перейдите на страницу Query_Lang-SCHFunctions_MembershipChecks_Object_IeeeSymbolOuterEdge((Object_IeeeSymbolOuterEdge))_AD для версии 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Query Functions - Membership Checks

Summary

Returns all child objects of pin objects whose IEEE Symbol Outside Edge property complies with the Query.

Syntax

Object_IeeeSymbolOuterEdge(Parent) = IeeeSymbolOuterEdge_String
Object_IeeeSymbolOuterEdge(Parent) <> IeeeSymbolOuterEdge_String

IeeeSymbolOuterEdge_String must be one of the following strings:

  • 'Active Low Input'
  • 'Active Low Output'
  • 'Dot'
  • 'No Symbol'

Example Usage

Object_IeeeSymbolOuterEdge(Parent) = 'Dot'
Returns all child objects of pin objects whose IEEE Symbol Outside Edge property is Dot.

Object_IeeeSymbolOuterEdge(Parent) <> 'Active Low Output'
Returns all objects except child objects of pin objects whose IEEE Symbol Outside Edge property is Active Low Output.

Object_ObjectKind(Parent) = 'Pin' && Object_IeeeSymbolOuterEdge(Parent) <> 'No Symbol'
Returns all child objects of pin objects except those pin objects whose IEEE Symbol Outside Edge property is No Symbol.

Tips

  1. The single quote characters (') at the start and end of IeeeSymbolOuterEdge_String are mandatory.
  2. The IEEE Symbol Outside Edge property is only defined for pin objects.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.