Single Click Ordering with Altimade in Altium NEXUS

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent page: Preparing Your Design for Manufacture

Ultimately, each PCB design should be sent to the manufacturing floor for being fabricated and assembled. That can be difficult due to ineffective communication methods between the design and manufacturing teams, incompatible tools and data formats, non-transparent requirements of the manufacturing to the layer stack and design constraints and other considerations.

Altium NEXUS, in conjunction with the Altimade application, enables you to request an instant quote and place an order to produce your PCB directly from the design environment. Using Altimade, you are able to access up-to-date prices and lead times and track your orders. All data required for manufacturing is shared via the Altium 365 platform, without the need to export and transfer files manually. Altimade modernizes and accelerates the prototype manufacturing process by connecting design, manufacturing, and supply chain data and professionals on the Altium 365 cloud platform to provide an easy, convenient user experience.

Altimade: Manufacturing Made Easy.

Your Interface to Altimade

Your direct interface to Altimade from within Altium NEXUS is provided courtesy of the Manufacturing panel. This panel is 'command central' for configuring available manufacturing options, performing necessary project checks, and viewing current orders for the PCB.

The Manufacturing panel
The Manufacturing panel

Note that the Manufacturing panel and the Altimade functionality are currently under continuous development, and access is by invitation only at this time. To request access to this functionality, please fill out and send the web form on the Altimade page of the altium.com site.

To access the Manufacturing panel from Altium NEXUS when it is made available for your organization, the Altimade Manufacturing extension must be installed in Altium NEXUS. The extension is automatically installed with Altium NEXUS. It can be manually installed/removed or updated from the Altium NEXUS Extensions and Updates page, which is accessed by clicking the  drop-down then choosing Extensions and Updates. The Altimade Manufacturing extension is located within the Installed tab and within the Updates tab when a software update is available.

The Altimade Manufacturing extension icon
The Altimade Manufacturing extension icon

► See Extending & Updating Your Installation for more information on installing and managing Altium NEXUS extensions.

Prerequisites

  • Before ordering the manufacture and shipment of your PCB design, ensure that you are connected to your Altium 365 Workspace and have opened a project from that Workspace and one of its documents. Use the File » Open Project command to choose a Workspace project from those that have been shared with you. The Manufacturing panel will provide hints for these prerequisites.
  • The PCB project must contain a PCB design document and an ActiveBOM document (*.BomDoc).

Order and PCB Fabrication Parameters

For defining the number of boards to be manufactured and shipped, enter this number in the field below the preview image of the board at the top of the panel. The number must be between 1 and 100.

For defining fabrication parameters, click the Preferences control. Use the drop-downs that appear to select desirable Solder Mask Color and Silkscreen Color from the lists of available options. Other fabrication parameters displayed below are read-only.

Specify the desirable number of boards to be produced and PCB fabrication parameters.
Specify the desirable number of boards to be produced and PCB fabrication parameters.

To calculate the shipment date and minimum cost, click the  button at the top-right of the panel. The project checks will be run, and if any check violations are detected, they will be shown in the panel.

Project Checks

To order the manufacture of your PCB design through Altimade, it should meet a range of requirements that are monitored by the project checks. Checks and all related violations are located in the Project Checks section of the Manufacturing panel:

  • Manufacturer Constraints – that includes hard-coded checks of the board size (it cannot exceed minimum and maximum limits), layer stack (limits for layer count, total board thickness, etc.), some technological limitations (e.g. for the routing width and drill size), and so on.

    When the PCB design meets all manufacturer constraints, the  icon will be shown next to the Manufacturing Constraint entry. If a violation of any manufacturing constraint check is detected, an entry for it will be shown instead, with the  icon next to it. The value in brackets in an entry displays the limit value of the manufacturing constraint in violation – e.g. (0.127mm) in the Min Trace Width (0.127mm) entry specifies that 0.127mm is the minimum value for routing width (and that the design contains routing of a smaller width). Click the View Details control next to it to cross-probe to the offending object or open the Layer Stack Manager, where applicable. The listed violations must be fixed for proceeding with the PCB manufacturing order.

    Manufacturer Constraint check issues will be listed in the Project Checks section of the panel. Use the View Details control to locate and fix the issue where applicable. Hover the cursor over the image to see the panel when there are no Manufacturer Constraint check issues.
    Manufacturer Constraint check issues will be listed in the Project Checks section of the panel. Use the View Details control to locate and fix the issue where applicable. Hover the cursor over the image to see the panel when there are no Manufacturer Constraint check issues.

    Below is the list of current Altimade manufacturing constraints.

    Constraint Range/value accepted by Altimade
    Minimum trace width 5 mil (0.127mm)
    Minimum spacing 5 mil (0.127mm)
    Minimum annular ring 4 mil (0.1016mm)
    Clearances from edge of board 10 mil (0.254mm)
    Minimum drill size 10 mil (0.254mm)
    Minimum paste aperture 12 mil (0.3048mm)
    Minimum silkscreen size 5 mil (0.127mm)
    Minimum route size 39.37 mil (1.0mm)
    Board width 0.10 - 14.88 in (2.54 - 377.952mm)
    Board height 0.10 - 14.88 in (2.54 - 377.952mm)
    Layer count 2, 4, 6, 8
    Soldermask color Blue
    Red (default)
    Green
    Light Green
    Matte Green
    Yellow
    Black
    Matte Black
    White
    Dark Brown
    Transparent
    Silkscreen color Yellow
    Red
    Green
    Blue
    Black
    White (default)
    Board thickness 2 Layer Board - 0.2mm
    4 Layer Board - 0.4mm
    6 Layer Board - 0.6mm
    Inner copper weight 1 oz
    Outer copper weight 1 oz
    Surface Finish (the metal plating process that should be used for PCB fabrication) ENIG
    Logo control No
    Max drill ratio 10
    Max number of unique components 100
    Max total placements 300
  • Bill of Materials – alongside manufacturer constraints, BOM checks are performed for the PCB to be manufactured through Altimade, including checks such as End of Life or Obsolete manufacturer lifecycle state or insufficient stock of a selected part.

    The following vendors are supported by Altimade:

    • Preferred: Digikey, Mouser.
    • Standard: Arrow, TTI, Heilind, Sager, Avnet, Newark (UK-based).
    • Other sourcing options: DNP (Do Not Populate), Consignment.

    When all BOM checks are performed with no issues, the  icon will be shown next to the Bill of Materials entry. If a violation of any manufacturing constraint check is detected, an entry for it will be shown instead, with the  icon next to it. Click the View Details control next to it to open the Bill of Materials dialog and review the found issues. To fix an issue from the dialog, you can:

    • When the Altimade option is selected as Sourcing – select another part available from the list.
    • Select the Consignment option as Sourcing to send your own selected parts to the manufacturer.
    • Select the DNP option as Sourcing.

    After changing a part, click the Apply Selection button to save the change.

    Bill of Materials check issues will be listed in the Project Checks section of the panel. Use the View Details control to open the Bill of Materials dialog and fix the issues. Hover the cursor over the image to see the panel and the dialog when there are no Bill of Materials check issues.
    Bill of Materials check issues will be listed in the Project Checks section of the panel. Use the View Details control to open the Bill of Materials dialog and fix the issues. Hover the cursor over the image to see the panel and the dialog when there are no Bill of Materials check issues.

  • Design Rule Check – to run a Design Rule Check directly from the Manufacturing panel, use the Run control next to the Design Rule Check entry. A batch-mode DRC will be initiated, and all detected violations will be listed in the Messages panel.

    Batch DRC can be run directly from the Manufacturing panel.
    Batch DRC can be run directly from the Manufacturing panel.

    While DRC is not mandatory for ordering manufacture a PCB through Altimade, it is always recommended to perform DRC before producing the PCB to make sure that the design meet all requirements defined by the design rules.

    For more information about the design rule system of Altium NEXUS's PCB editor, see Defining, Scoping & Managing PCB Design Rules.

When any change is applied to the project (e.g. for fixing existing check violations), click the  button at the top-right of the panel to recheck the project and update the quote.

Ordering

When the project is checked and there are no issues related to manufacturing constraints and BOM, the shipment date and minimum cost (in USD) will be shown in the panel. Expand the Cost Breakdown section to see the info on cost breakdown in detail.

To see the details of what you are paying for, expand the Cost Breakdown section of the Manufacturing panel.
To see the details of what you are paying for, expand the Cost Breakdown section of the Manufacturing panel.

To proceed with ordering, select the I agree to the Terms of Service checkbox. Click the Terms of Service link to open the Altimade Order Agreement page. Note that this checkbox is shown only for the first checkout. After initial selecting, it will not be shown again.

Click the Review and Checkout button at the bottom of the Project Checks section of the panel to open the Altimade view of the detailed management page for the project (in the Altium 365 Workspace browser interface) in your default web browser for completing the order.

Select the I agree to the Terms of Service checkbox and click the Review and Checkout button to complete the ordering process in the Altium 365 Workspace browser interface.
Select the I agree to the Terms of Service checkbox and click the Review and Checkout button to complete the ordering process in the Altium 365 Workspace browser interface.

To learn more about working with the Altimade view of the detailed project management page, visit the Altimade Order Management page.

Back in Altium NEXUS, the order entries will be displayed in the Orders section of the Manufacturing panel. Click an order entry in the panel to access the order's current information and its details on the Altimade page.

Orders created for a PCB will be listed under the Orders section of the Manufacturing panel.
Orders created for a PCB will be listed under the Orders section of the Manufacturing panel.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content