Altium NEXUS Documentation

ClearContents

Parent page: UnifiedComponent Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to clear the contents of one or more selected (and editable) cells in the component definitions region (main grid) of the active Component Library document.

Access

This command can be accessed from the Component Library Editor when configured in Batch Editor mode by:

  • Selecting one or more editable cells in the main grid region and choosing the Edit » Clear Contents command from the main menus.
  • Right-clicking over an editable cell (or a cell in a selection of editable cells) in the main grid region and choosing the Clear Contents command from the context menu.
  • Selecting one or more editable cells in the main grid region and using the Delete keyboard shortcut.
If the Component Library Editor is currently in Single Component Editor mode, switch to the Batch Editor mode using the Tools » Switch to Batch Editor command.

Use

After launching the command, the current contents of the selected cell(s) will be cleared, leaving the cell(s) empty.

Tips

  1. If the Component Library document references a Component Template, keep in mind that:
    1. If a parameter is marked as Read Only in the template, you cannot clear the contents of the applicable cell for that parameter.
    2. If a parameter is marked as Required in the template, clearing the contents of the applicable cell for that parameter will cause the cell to be highlighted with a red border alerting you to the fact that a value is required.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: