VersionControl_Cmd-NewFolderNewFolder_AD

Created: июля 27, 2015 | Updated: марта 08, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Вы просматриваете версию 2.1. Для самой новой информации, перейдите на страницу VersionControl_Cmd-NewFolder((NewFolder))_AD для версии 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: VersionControl Commands

The following pre-packaged resource, derived from this base command, is available:

New

ExpandСвернуть

Applied Parameters: None

Summary

This command is used to create a new sub-folder beneath the currently selected folder in the structure.

Access

This command is accessed from the Folders region of the Storage Manager panel with the required parent folder selected by right-clicking and choosing the New command from the context menu.

Use

Ensure the parent folder under which you want to create a new folder is selected in the Folders region of the Storage Manager panel.

After launching the command, the folder will be added to the hard disk and the entry will become editable, allowing you to directly type the name for the folder as required.

Tips

If the parent folder already contains sub-folders, the new folder will be added below those existing folders in the structure.

Версия для печати

VersionControl_Cmd-NewFolderNewFolder_AD

Summary

Access

Use

Tips

Was this page helpful?