Custom AutoFilter

Вы просматриваете версию 1.0. Для самой новой информации, перейдите на страницу Custom AutoFilter для версии 1.1

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Custom AutoFilter dialog
The Custom AutoFilter dialog

Summary

The Custom AutoFilter dialog is used to filter a column in a table or grid.

Access

The dialog is accessed by clicking the down-arrow in the header of a column, then selecting Custom when filtering a column from any smart table grid. 

Options/Controls

  • Use the first drop-down to select the desired filter. Enter a value in the textbox (e.g., to show only 16MHz items, enter 16MHz) or use the drop-down to select the type of filter data.
  • And/Or - select And or Or to specify the filtering condition if desired. 
  • Use the second drop-down to select the desired second filter if desired. Enter a value in the textbox (e.g., to show only 16MHz items, enter 16MHz) or use the drop-down to select the type of filter data.

 

 

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.