Configuring Schematic Bus Object Properties in Altium Designer

您正在阅读的是 18.1. 版本。关于最新版本,请前往 Configuring Schematic Bus Object Properties in Altium Designer 阅读 21 版本
Applies to Altium Designer versions: 18.0 and 18.1
 

Parent page: Bus

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Bus object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Bus object properties are available for editing in the Properties panel when a placed Bus is selected in the workspace.

The Bus default settings in the Preferences dialog and the Bus mode of the Properties panel            The Bus default settings in the Preferences dialog and the Bus mode of the Properties panel

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Properties

  • ​Width - use the drop-down to select the desired width. Choices are: Smallest, Small, Medium, and Large. Click the color box to select the desired color for the bus.

Vertices (Properties panel only)  

This region is used to modify the individual vertices of the currently selected region object. You can modify the locations of existing vertices, add new vertices or remove them as required. Bus connections between vertex points can be defined and support is also provided for exporting vertex information to and importing from a CSV-formatted file. You also can adjust the position of the object by globally applying delta-x/delta-y values to all vertex points.

  • Vertices Grid - lists all of the vertex points currently defined for the object in terms of:
    • Index - the assigned index of the vertex (non-editable).
    • X - the X (horizontal) coordinate for the vertex. Click to edit.
    • Y - the Y (vertical) coordinate for the vertex. Click to edit.
  • Add - click to add a new vertex point. The new vertex will be added below the currently focused vertex entry and will initially have the same X,Y coordinates as the focused entry. Click  to remove the currently selected vertex.
Content
Content