Altium NEXUS Documentation

Choose PCB to Use

Created: September 6, 2017 | Updated: January 26, 2019
您正在阅读的是3.1版本。 关于最新版本,请前往阅读4版本

The Choose PCB to Use dialogThe Choose PCB to Use dialog

Summary

The Choose PCB to Use dialog is used to select which PCB parameters are to be made available in an ActiveBOM when a PCB project includes more than one PCB file.

Visit the ActiveBOM page to learn more.

Access

The dialog is accessed by clicking  in the Sources region on the Columns tab of the ActiveBOM Properties panel.

The dialog is accessed only if the PCB project includes more than one PCB document.

Options/Controls

  • PCB Files - this is a list of all PCB files detected in the current PCB project. Select the PCB to use then click OK. The following PCB-specific parameters will be extracted from that PCB and presented in the Columns list, ready to be included in ActiveBOM.
    • Center-X (Mil) - geometric center of the component
    • Center-Y (Mil)
    • Center-X (mm)
    • Center-Y (mm)
    • Layer
    • Pad-X (Mil) - location of Pad 1
    • Pad-Y (Mil)
    • Pad-X (mm)
    • Pad-Y (mm)
    • Ref-X (Mil) - location of component reference point (as defined in the PCB library editor)
    • Ref-Y (Mil)
    • Ref-X (mm)
    • Ref-Y (mm)
    • Rotation

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: