CAM编辑器 - 绘图模式

您正在阅读的是 3.2. 版本。关于最新版本,请前往 CAM编辑器 - 绘图模式 阅读 4 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Accessing, Defining & Managing System Preferences

The CAM Editor - Drawing Mode page of the Preferences dialog.The CAM Editor - Drawing Mode page of the Preferences dialog.

Summary

The CAM Editor – Drawing Modes page of the Preferences dialog provides numerous controls relating to the general settings of the CAM Editor within the CAM design space.

Access

This page is part of the main Preferences dialog that is accessed by clicking the  control in the upper-right corner of the workspace then selecting the Drawing Modes entry under the CAM Editor folder.

Options/Controls

Grid

  • On/Off - enable this option to display the grid. The cursor will not snap to the displayed grid unless the Object Snap setting has been set to the grid.
  • Size: X:Y (mil) - enter a X:Y sizes value in this field. The X, Y sizes displays the grid. You may use independent X and Y values (i.e. X=100.0, Y=50.0).

Object Snap

  • Object Snap - enable this option to ensure that placed objects pull the cursor into position based on cursor proximity to the selected object snap point (hotspot).

Modes

  • Ortho - enable this option and the Ortho Mode will be active. In this mode, you can Draw, Edit, or Measure at 90 Degree increments on the CAM document.
  • Blips - enable this option, and the Blips mode is used as a tool to help you see the location that is selected by the mouse. So for each left-click a reference '+' symbol appears.  These reference symbols are temporary and will disappear when the CAM document is refreshed.  

Units

  • English - enable this option to use Imperial measure units in Inches (In).
  • Metric - enable this option to use metric units in millimetres (mm).

Arc Direction

  • Clockwise - enable this option to define the direction of arcs clockwise. Regardless of the direction setting, the direction of arcs can be changed individually as they are drawn.
  • C - Clockwise - enable this option to define the direction of arcs counter-clockwise. Regardless of the direction setting, the direction of arcs can be changed individually as they are drawn.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.