CAM编辑器 - Film盒
Created: 一月 02, 2020 | Updated: 六月 08, 2020
| Applies to versions: 3.1 and 3.2
您正在阅读的是 3.2. 版本。关于最新版本，请前往 CAM编辑器 - Film盒 阅读 4 版本
Parent page: Accessing, Defining & Managing System Preferences
The CAM Editor - Film Box page of the Preferences dialog.
Summary
The CAM Editor – Drawing Modes page of the Preferences dialog provides numerous controls relating to the general settings of the CAM Editor within the CAM design space.
Access
This page is part of the main Preferences dialog that is accessed by clicking the 
control in the upper-right corner of the workspace then selecting the Film Box entry under the CAM Editor folder.
Options/Controls
Box Name
- Box Name - use this drop-down to select one of the following values from the box name. This field must contain a valid name, for example: "box1".
Box Size (Inch)
- X - enter the desired X-axis box size in inches.
- Y - enter the desired Y-axis box size in inches.
Lower Left Corner (Inch)
- X - enter the desired X-axis lower-left corner size in inches.
- Y - enter the desired Y-axis lower-left corner size in inches.
Display
- Display Box At Start Up - enable this option if you want the film box to appear when the CAM Editor starts up.