Altium NEXUS Documentation

HideJumpers

Created: July 27, 2015 | Updated: August 1, 2018

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Hide=Net

Summary

This command is used to hide the jumper connection lines with respect to components associated with a single net. A jumper connection defines an electrical connection between component pads that are not physically routed with primitives on the PCB. Pads that share the same Jumper ID and electrical net tell the system that there is a legitimate, although physically unconnected, connection between them - appearing on the PCB as a curved connection 'wire'.

Access

This command can be accessed from the PCB Editor by:

  • Choosing the View » Jumpers » Hide Net Jumpers command from the main menus.
  • Using the N keyboard shortcut to access a connections pop-up menu then choosing the Hide Jumpers » Net command.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to choose an electrical object or connection. Position the cursor over the net (or a pad connected to the net) you wish to hide and click or press Enter. All jumper connection lines for components associated to the chosen net will be hidden.

Continue hiding the jumper connection lines for components associated with other nets or right-click or press Esc to exit.

Tips

  1. If you do not know the location of a pad on the net or one of its connection lines, click in free space and a dialog will pop up, prompting for the net name. If you are unsure of the net name, type ? then click OK to launch the Nets Loaded dialog, which lists all loaded nets for the design. The jumper connection lines for the components associated to the net you choose in the dialog will be hidden when you click OK.


Applied Parameters: Hide=ComponentJumpers

Summary

This command is used to hide the jumper connection lines for a particular component. A jumper connection defines an electrical connection between component pads that are not physically routed with primitives on the PCB. Pads that share the same Jumper ID and electrical net tell the system that there is a legitimate, although physically unconnected, connection between them - appearing on the PCB as a curved connection 'wire'.

Access

This command can be accessed from the PCB Editor by:

  • Choosing the View » Jumpers » Hide Component Jumpers command from the main menus.
  • Using the N keyboard shortcut to access a connections pop-up menu, then choosing the Hide Jumpers » On Component command.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to choose a component. Position the cursor over the component whose associated jumper connection lines you wish to hide then click or press Enter. The jumper connection lines for that component will be hidden.

Continue hiding jumper connection lines associated with other components or right-click or press Esc to exit.

Tips

  1. If you do not know the location of a component, click in free space and a dialog will pop up, prompting for the component's designator. If you are unsure of the designator, type ? then click OK to launch the Components Placed dialog, which lists all components in the design. The jumper connection lines for the component you choose in the dialog will be hidden when you click OK.


Applied Parameters: Hide=All

Summary

This command is used to hide all jumper connection lines in the design. A jumper connection defines an electrical connection between component pads that are not physically routed with primitives on the PCB. Pads that share the same Jumper ID and electrical net tell the system that there is a legitimate, although physically unconnected, connection between them - appearing on the PCB as a curved connection 'wire'.

Access

This command can be accessed from the PCB Editor by:

  • Choosing the View » Jumpers » Hide All Jumpers command from the main menus.
  • Using the N keyboard shortcut to access a connections pop-up menu,then choosing the Hide Jumpers » All command.

Use

After launching the command, the jumper connection lines associated with any and all components in the design will be hidden.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。