Altium NEXUS Documentation

InsertBoardAssemblyView

Modified by Jason Howie on Jun 27, 2017

Parent page: PcbDrawing Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to place a Board Assembly View object into the active Draftsman document (*.PCBDwf). This is one of Draftsman's automated drawing views, and shows the board outline with cutouts, holes, and component graphics with additional notation.

For a high-level look at how the Altium Draftsman Drawing System provides an interactive approach to the creation of production documentation for your PCBs, see Draftsman. For detailed information about this object type, see Board Assembly View.

Access

This command can be accessed from the PcbDrawing Editor by:

  • Choosing the Place » Board Assembly View command from the main menus.
  • Locating and using the Board Assembly View command () on the Active Bar.
  • Clicking the  button on the Drawing Views toolbar.
  • Right-clicking in the workspace and choosing the Place » Board Assembly View command from the context menu.

Use

If your PCB design project has more than one PCB, ensure that the board from which you wish to generate the assembly view is selected in the PCB Document field, in the Source section of the Properties panel (set to present the Document Options, when no objects are selected in the workspace).

After launching the command, data will be acquired from the source PCB document, and a Board Assembly View will appear floating on the cursor. Position the view as desired and click to effect placement. If your Draftsman document has multiple sheets, you can simply zoom out and move the view to the intended sheet, while it is still floating on the cursor.

The component graphics are automatically generated and take data on a priority basis from several sources:

  1. The projection of a board component's three-dimensional model (3D model) - used by default.
  2. A component's silk screen graphic taken from Top/Bottom Overlay layer - used when a 3D model is not available.
  3. A graphic of the component's dimensions derived from its contact pads (its Bounding Box) - used when both a 3D models and screen overlay are not available.
Alternatively, you can specify that the graphics be taken from defined mechanical layers for your board - specified in the Top Assembly Layer and Bottom Assembly Layer fields, in the Source section of the Properties panel.

Tips

  1. A Board Assembly View can be graphically modified after placement. Click and drag the view to move it to a different location within the current sheet. Click on it to select it - an editing handle will appear at its top-right corner. Click and drag this handle to resize the view.
  2. Most aspects of a placed Board Assembly View are available for editing through the Properties panel. If the panel is already open, simply select a placed Board Assembly View to populate the panel with its associated properties. If the panel is not open, double-click on the Board Assembly View to access it.
  3. By default, the view is from the top side of the board. This can be changed after placement as required, through the Properties panel. Alternatively, copy and paste the initial view as many times as you need, with each copy changed to show a different perpective of the assembled board. Supported views are: Top, Bottom, Left, Right, Front, and Back.
  4. With a Board Assembly View selected in the workspace, a component's visibility, designator attributes and the geometry source used for forming its graphics can be changed in the Component Display Properties section of the Properties panel.
  5. For even greater detail, consider creating a Board Section View, or a Board Detail View from your Board Assembly View.
  6. If changes have been made to the PCB document, using the Tools » Update Board command will ensure that a placed Board Assembly View is kept in-sync.
  7. Defaults for this primitive type can be defined on the Draftsman - Defaults page of the Preferences dialog.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。