Altium NEXUS Documentation

Choose Destination Document

Created: June 8, 2017 | Updated: October 27, 2017
您正在阅读的是3.2版本。 关于最新版本,请前往阅读4版本

The Choose Destination Document dialog
The Choose Destination Document dialog

Summary

The Choose Destination Document dialog provides controls to specify the target schematic document on which to move the currently selected design objects when using the refactoring feature. Refactoring allows circuitry to be moved around between the project's source schematics and is particularly useful where a sheet is becoming overloaded, or the circuitry is better contained as a sub-sheet that is referenced by a sheet symbol on a sheet above it in the hierarchy.

Access

The dialog is accessed from the schematic editor by selecting the design objects constituting the circuitry to be moved then clicking Edit » Refactor » Move Selected Subcircuit to Different Sheet from the main menus.

Options/Controls

The dialog lists all candidate schematic documents for the project that can legitimately be used as the target sheet for the move. Click on an entry to select the required document.

The active schematic document on which the selected circuitry currently resides is grayed out. As it is the source document, it cannot also be a valid target document for the move and is therefore unavailable.
If the selected sub-circuitry is to reside on a fresh schematic sheet (i.e., a blank canvas), ensure that the schematic is first created and saved so that it will appear in the dialog.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: