Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerCompany Dashboard
Ver: Version: 2.1
543.23.13.02.12.01.11.0
Close
搜索 Search on Documentation
Documentation Altium NEXUS 文档 ... 对话框参考 Dialogs((G to L))_AD

WorkspaceManager_Dlg-LayerClassNameFormLayer Class Name_AD

Created: 十月 12, 2017 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2
您正在阅读的是 2.1. 版本。关于最新版本，请前往 WorkspaceManager_Dlg-LayerClassNameForm((Layer Class Name))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Layer Class Name dialogThe Layer Class Name dialog

Summary

The Layer Class Name dialog is used to enter a new name for a layer class.

Access

The dialog is accessed by right-clicking a layer on the Layers tab of the Gerber Setup dialog or the ODB++ Setup dialog then selecting Add Layer Class or Edit Layer Class. 

The Edit Layer Class option is accessible only when a layer class is selected in the Layers to Plot region of the Gerber Setup dialog or ODB++ Setup dialog.

Options/Controls

  • Layer Class Name - enter the desired layer class name or use the drop-down to select from the available layer names.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.