Altium Designer Documentation

Run Process

Created: July 28, 2015 | Updated: June 19, 2017
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1

The Run Process dialog

Summary

The Run Process dialog allows users to execute processes directly from the dialog.

Access

To access this dialog, click DXP » Run Process.

Options/Controls

  • Process - use the drop down to select a process - the drop down lists any previously entered processes. The process shown in this box will be launched when OK is clicked.
    • Browse - use to open the Process Browser dialog in which you can browse and select a process. The selected process will appear in the Process box and will be launched when OK is clicked.
  • Parameters - shows the parameters that are to be passed to the selected process when it is run. Parameters are defined as ParameterName = Value. To enter more than one parameter, separate the parameter statements with the "pipe" symbol ( | ). 
    • Info - click for information on the parameters available for the process currently shown in the Process box.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: