Differences Panel

Now reading version 17.1. For the latest, read: Differences Panel for version 21
 

The Differences panel displays a hierarchical view of document differences.
The Differences panel displays a hierarchical view of document differences.

Summary

The Differences panel is used to display the logical or physical differences found by the software's built-in Differences Comparator when comparing design documents. For example, when comparing the source document hierarchy (schematics) for a project against the PCB design document. The panel allows you to interactively explore the differences before the decision to create an Engineering Change Order (ECO) that will be used to synchronize the project documents.

Panel Access

To open the Differences panel, from a schematic document:

  • Click View » Workspace Panels » Design Compiler » Differences.
  • Click the Design Compiler tab on the bottom right-hand side of the editor then click Differences.

Panels can be configured to be floating in the editor space or docked to sides of the screen. If the Projects panel is currently in the group of docked Workspace Manager panels, use the Differences tab located at the bottom of the panels to bring it to the front.

Displaying Differences

How the Differences panel is applied depends on whether the goal is to:

  • Analyze the integrity of the complete project in terms of its content and structure by detecting logical differences within the project hierarchy.
  • Compare two versions of the same Schematic or PCB document by detecting their graphical (physical) differences.
The Differences panel is populated when using the Explore Differences feature of the Differences Comparator (Differences between dialog), which is opened with the Show Differences command.

Displaying Logical Differences

Comparison of project documents for logical differences is carried out through the Choose Documents To Compare dialog, activated by right-clicking on a project (or project document) in the Projects panel and selecting Show Differences from the associated context menu.


Right click on a project name and select Show Differences to open the Choose Documents To Compare dialog.

Typically, the PCB document would be compared against the source document hierarchy for the parent project to detect logical differences between the schematic design content and the PCB design content.

After clicking OK, if any differences exist between the nominated documents, the Differences between dialog will open. Information in the Differences panel will only appear after clicking the Explore Differences button in the Differences between dialog.

The Differences panel provides a convenient alternative to the Differences between dialog for browsing through detected document differences.
The Differences panel provides a convenient alternative to the Differences between dialog for browsing through detected document differences.

The Differences panel will only display the differences that are listed in the Differences between dialog. These, in turn, are determined by the selections made in the Comparator tab of the Project Options dialog (Project » Options).

This tab lists all of the comparison types, such as differences associated with Components, Nets and Parameters. Setting the Mode for each comparison category between Find Differences or Ignore Differences will determine if the Differences Comparator passes its results into the Differences between dialog.

Set up how the differences are detected and reported in the Project Options dialog.
Set up how the differences are detected and reported in the Project Options dialog.

The Differences panel displays the differences found between source documents in a tree-like structure, where the top-level folder displays the total number of differences detected. Sub-folders are then created for each specific comparison type that appears in the Differences between dialog. Each sub-folder lists the specific differences that have been found, which in turn are broken down further into objects on the documents that are responsible for creating those differences.

If the associated document is open (or open and hidden), clicking on an object entry in the panel will cross-probe to the object on the document.

The relevant editor will graphically highlight the entry as follows:

  • For a schematic document, the visual display of the object uses the zoom and dim effect where the object is highlighted by dimming all other objects. The contrast of the dimming can be varied with the Dim slider found by clicking Mask Level at the bottom right-hand side of the editor window.


    Interactive navigation in the Differences panel displays the object that created the difference.
  • For a PCB document, the visual display of the object uses the zoom and mask effect where the object is highlighted by applying a monochrome mask to all other objects. The contrast of the applied mask can be varied with the Mask Level slider found by clicking Mask Level at the bottom right-hand side of the editor window.


    Interactive navigation in the Differences panel displays the object that created the difference.

Displaying Physical Differences

The graphical (physical) comparison of two versions of the same schematic or PCB document is basically carried out in the same way as for the logical comparison outlined above, but also makes use of the Advanced Mode in the Choose Documents To Compare dialog.

Perform a document physical comparison using the Show Differences command (Project panel right-click menu) to open the Choose Documents To Compare dialog then check the Advanced Mode box. With all project files now shown in the dialog, select the two variations of a document for comparison.


Selecting documents for physical comparison from the Choose Documents To Compare dialog in Advanced Mode.

Clicking OK will proceed with the graphical comparison and open the Differences between dialog as outlined previously. Click Explore Differences to open the interactive differences list in the Differences panel.


Detected physical differences hierarchy in the Differences panel.


The panel displays the differences found between the documents in a tree-like structure. The top-level folder displays the total number of differences detected. Entries are created for each type of difference, which in turn contains the specific references and the object (port, part, etc.) involved for each.

Selecting the object entry for a detected difference will highlight and zoom to the object in the editor workspace.


Interactive navigation in the Differences panel displays the object that created the difference as it is selected in the panel.

The relevant editor will graphically highlight the entry as follows:

  • For a schematic document, the visual display of the object uses the zoom and dim effect where the object is highlighted by dimming all other objects. To clear the display filter, click inside the design editor window or click Clear at the bottom right-hand side of the editor window.
     
  • For a PCB document, the visual display of the object uses the zoom and mask effect where the object is highlighted by applying a monochrome mask to all other objects. To clear the display filter, click inside the design editor window or click Clear at the bottom right-hand side of the editor window.

Tips

  • If an object in the panel resides on a document that is currently hidden, the document will be opened automatically and made the active document in the design editor window when you click the associated entry.
  • The filtering applied when cross-probing from the Differences panel is temporary. As such, you are not prevented from selecting or editing design objects that fall outside the scope of the filter.
  • The information in the Differences panel will be cleared when performing a new document comparison, or compiling the parent project.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.

Content