Altium Designer Documentation

GenerateComponentReportAdvanced

Created: May 14, 2019 | Updated: May 14, 2019

Parent page: IntegratedLibrary Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to generate a report listing all components contained within the currently active library in the Libraries panel. The report can be configured to include parameter, pin and model information, as well as component/model previews (drawn in color or left black and white). The report can be generated as a Microsoft Word document (*.doc), or as a standard HTML document (*.html).

Access

The command is accessed by right-clicking in the Components, Models, or Supplier Links regions of the Libraries panel, and choosing the Library Report command from the context menu.

Use

After launching the command, the Library Report Settings dialog will appear. Use this dialog to configure the content and style of the report, and also where (and by what name) the report is to be generated. By default, the report will be named after the library, and stored in the same location.

After clicking OK the report will be generated. If you have opted to have the report opened after generation, this will happen provided you have either Microsoft Word (if generating a Doc style report), or Microsoft Internet Explorer (if generating a HTML style report) installed on your computer.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: