Altium Designer Documentation

MoveCursor

Using Altium Documentation
Created: July 27, 2015 | Updated: April 11, 2017
Now reading version 17.1. For the latest, read: MoveCursor for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:

Move Cursor Up


Applied Parameters: Direction=Up|BigSteps=False

Summary

This feature enables you to use the keyboard to move the cursor upwards in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Up Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved upward in the workspace by one snap grid unit.

Use the command repeatedly to move the cursor further upward.

Tips

  1. One snap grid unit is defined as being the value specified in the Snap field - part of the Grids region of options, on the Sheet Options tab of the Document Options dialog.
Move Cursor Down


Applied Parameters: Direction=Down|BigSteps=False

Summary

This feature enables you to use the keyboard to move the cursor downwards in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Down Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved downward in the workspace by one snap grid unit.

Use the command repeatedly to move the cursor further downward.

Tips

  1. One snap grid unit is defined as being the value specified in the Snap field - part of the Grids region of options, on the Sheet Options tab of the Document Options dialog.
Move Cursor Left


Applied Parameters: Direction=Left|BigSteps=False

Summary

This feature enables you to use the keyboard to move the cursor to the left in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Left Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved to the left in the workspace by one snap grid unit.

Use the command repeatedly to move the cursor further to the left.

Tips

  1. One snap grid unit is defined as being the value specified in the Snap field - part of the Grids region of options, on the Sheet Options tab of the Document Options dialog.
Move Cursor Right


Applied Parameters: Direction=Right|BigSteps=False

Summary

This feature enables you to use the keyboard to move the cursor to the right in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Right Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved to the right in the workspace by one snap grid unit.

Use the command repeatedly to move the cursor further to the right.

Tips

  1. One snap grid unit is defined as being the value specified in the Snap field - part of the Grids region of options, on the Sheet Options tab of the Document Options dialog.
Move Cursor Up 10


Applied Parameters: Direction=Up|BigSteps=True

Summary

This feature enables you to use the keyboard to move the cursor upwards in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Shift+Up Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved upward in the workspace by ten snap grid units.

Use the command repeatedly to move the cursor further upward.

Tips

  1. One snap grid unit is defined as being the value specified in the Snap field - part of the Grids region of options, on the Sheet Options tab of the Document Options dialog.
Move Cursor Down 10


Applied Parameters: Direction=Down|BigSteps=True

Summary

This feature enables you to use the keyboard to move the cursor downwards in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Shift+Down Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved downward in the workspace by ten snap grid units.

Use the command repeatedly to move the cursor further downward.

Tips

  1. One snap grid unit is defined as being the value specified in the Snap field - part of the Grids region of options, on the Sheet Options tab of the Document Options dialog.
Move Cursor Left 10


Applied Parameters: Direction=Left|BigSteps=True

Summary

This feature enables you to use the keyboard to move the cursor to the left in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Shift+Left Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved to the left in the workspace by ten snap grid units.

Use the command repeatedly to move the cursor further to the left.

Tips

  1. One snap grid unit is defined as being the value specified in the Snap field - part of the Grids region of options, on the Sheet Options tab of the Document Options dialog.
Move Cursor Right 10


Applied Parameters: Direction=Right|BigSteps=True

Summary

This feature enables you to use the keyboard to move the cursor to the right in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the cursor within the main design window, simply use the Shift+Right Arrow keyboard shortcut.

Use

After launching the command, the cursor will be moved to the right in the workspace by ten snap grid units.

Use the command repeatedly to move the cursor further to the right.

Tips

  1. One snap grid unit is defined as being the value specified in the Snap field - part of the Grids region of options, on the Sheet Options tab of the Document Options dialog.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: