Applied Parameters: None
This command is used to remove the current schematic template used. A template is a graphical entity that holds user-defined sheet size, border and title block descriptions.
This command can be accessed from the Schematic Editor by choosing the Design » Templates » Remove Current Template command from the main menus.
After launching the command, the Remove Template Graphics dialog will appear. Use this dialog to define from which documents the current template will be removed - either the current document only, all schematic documents in the current (active) project, or all open schematic documents - then click OK.
After the dialog closes, the template information in the lower right-hand corner of the sheet (the title block) will be removed. The border and sheet size remain unchanged.
- When removing the current template from all schematic documents in the current project, all documents that are currently closed will be opened as the removal is performed.
- When removing the current template from all open schematic documents, it is removed regardless of the project that a document belongs to.
- After using this command, the entry for the currently used template will be blank. This can be checked through the Properties panel (with no objects selected) by setting the Formatting and Size region of the Page Options section of the panel to its Template mode (). The Template field will show that no template is currently being referenced by the active document.