Altium Designer Documentation

Place Specific NoERC

Created: July 28, 2015 | Updated: June 19, 2017
Now reading version 15.1. For the latest, read: Place Specific NoERC for version 19.1

The Place Specific NoERC dialog.
The Place Specific NoERC dialog.

Summary

The Specific No ERC dialog allows the designer to suppress specific errors or warnings resulting from a Project Compile.  

Access

The Specific No ERC dialog can be accessed from the (Place » Directives » Place Specific No ERC) menu.  

Options/Controls

  • Compile Errors by Net - This column displays nets in the current project that have errors or warnings resulting from a compile.
  • Suppress - This column allows designers to select specific nets to be included by the No ERC.
  • Show selected net - Zoom to the schematic for the selected net in the Compile Errors by Net column.
  • Recompile Project - Click to compile all schematic pages in the project.
  • Automatically recompile - Enable to automatically recompile while placing directives, to ensure the list remains accurate.
  • Automatically show selected - Click to zoom to the corresponding schematic net selected from the Compile Errors by Net column.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: