Pie Chart

The feature documented here is no longer part of the software beyond version 17.1. Click to return to: Altium Designer Documentation for version 24

 

Parent page: Schematic Objects

A placed Pie Chart.

Summary

A pie chart is a non-electrical drawing primitive. It is a circular sector graphic element that can be placed on a schematic sheet. It can be filled or unfilled.

Availability

Pie charts are available for placement in both Schematic and Schematic Library Editors:

  • Schematic Editor - the following commands are available:
    • Choose Place » Drawing Tools » Pie Chart from the main menus.
    • Click the  button on the Utility Tools drop-down () of the Utilities toolbar.
  • Schematic Library Editor - choose Place » Pie Chart from the main menus.

Placement

After launching the command, the cursor will change to a cross-hair and you will enter pie chart placement mode. Placement is made by performing the following sequence of actions:

  1. Click or press Enter to anchor the center point of the pie chart.
  2. Move the cursor to adjust the radius of the pie chart, then click or press Enter to set it.
  3. Move the cursor to adjust the start point of the segment, then click or press Enter to anchor it.
  4. Move the cursor to change the position of the segment's end point, then click or press Enter to anchor it and complete placement of the pie chart.
  5. Continue placing further pie charts, or right-click or press Esc to exit placement mode.

Additional actions that can be performed during placement – while the pie chart is still floating on the cursor, and before the center point of the is anchored – are:

  • Press the Tab key to access an associated properties dialog, from where properties for the pie chart can be changed on-the-fly.
  • Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.
  • Press the Spacebar to rotate the pie chart anti-clockwise or Shift+Spacebar for clockwise rotation. Rotation is in steps of 90°.
  • Press the X or Y keys to mirror the pie chart along the X-axis or Y-axis respectively.

While attributes can be modified during placement (Tab to bring up associated properties dialog), bear in mind that these will become the default settings for further placement unless the Permanent option on the Schematic – Default Primitives page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Graphical Editing

This method of editing allows you to select a placed pie chart object directly in the workspace and change its size, shape or location, graphically.

When a pie chart object is selected, the following editing handles are available:

A selected Pie Chart.

  • Click and drag A to adjust the radius.
  • Click and drag B to adjust the end points.
  • Click anywhere on the pie chart – away from editing handles – and drag to reposition it. While dragging, the pie chart can be rotated (Spacebar/Shift+Spacebar) or mirrored (X or Y keys to mirror along the X-axis or Y-axis respectively).

If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the Schematic – Graphical Editing page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Double click on the locked object directly and disable the Locked property or disable the Protect Locked Objects option, to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available:

Via an Associated Properties Dialog

Dialog page: Pie Chart

This method of editing uses the Pie Chart dialog to modify the properties of a pie chart object.

The Pie Chart dialog.

The Pie Chart dialog can be accessed prior to entering placement mode, from the Schematic – Default Primitives page of the Preferences dialog. This allows the default properties for the pie chart object to be changed, which will be applied when placing subsequent pie charts.

During placement, the dialog can be accessed during placement by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

  • Double-clicking on the placed pie chart object.
  • Placing the cursor over the pie chart object, right-clicking and choosing Properties from the context menu.
  • Using the Edit » Change command and clicking once over the placed pie chart object.

Via an Inspector Panel

Panel pages: SCH Inspector, SCHLIB Inspector, SCH Filter, SCHLIB Filter

An Inspector panel enables the designer to interrogate and edit the properties of one or more design objects in the active document. Used in conjunction with appropriate filtering - by using the applicable Filter panel, or the Find Similar Objects dialog - the panel can be used to make changes to multiple objects of the same kind, from one convenient location.

Via a List Panel

Panel pages: SCH List, SCHLIB List, SCH Filter, SCHLIB Filter

List panel allows the designer to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the applicable Filter panel, or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter – allowing the designer to target and edit multiple design objects with greater accuracy and efficiency.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.

Content