Altium Designer Documentation

RemoveYAxis

Created: June 12, 2016 | Updated: April 11, 2017

Parent page: SimView Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to remove a Y-axis from the active wave plot in the current chart.

Access

This command can be accessed from the SimData Editor by:

  • Choosing the Plot » Remove Y Axis command from the main menus.
  • Right-clicking on the Y Axis and choosing the Delete Axis command from the context menu.

Use

First, ensure that the wave plot, from which you wish to remove the Y-axis, is made active in the Waveform Analysis window. This is achieved by clicking anywhere within the area of the wave plot.

Click on the specific Y-axis that you wish to remove and launch the command - the selected Y-axis will be removed.

Tips

  1. If the Number of Plots Visible option is set to All in the Document Options dialog (Tools » Document Options), the active wave plot is distinguished by a black solid line around its waveform name section. If the Number of Plots Visible option is set to 1, 2, 3, or 4, the active wave plot is distinguished by a black arrow at the left hand side of its display area.
  2. In order to view multiple Y-axes that have been defined, you must set the display option for the Number of Plots Visible to anything but All.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: