Altium Designer Documentation

RotateSelectionClockwise

Created: September 18, 2017 | Updated: September 20, 2017

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to rotate one or more selected module objects in a clockwise direction.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

With at least one module object selected, this command can be accessed from the Multi-board Schematic Editor by:

  • Choosing the Edit » Move » Rotate Selection Clockwise command from the main menus.
  • Using the Shift+Spacebar keyboard shortcut.

Use

First, ensure that all modules that you wish to include in the rotation are selected in the main workspace.

After launching the command, the selected modules will be rotated clockwise by 90°.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: