Altium Designer Documentation

SendToVault

Created: March 9, 2021 | Updated: March 9, 2021

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: ObjectKind=Document

Summary

This command is used to send the active schematic document to a server.

Access

With the desired schematic active, this command can be accessed by clicking File » Save As Managed Sheet to Server from the main menus.

Use

Ensure that the schematic you want to save to the server is the active document.

After launching the command, a trimmed-down version of the Explorer panel (titled Choose Planned Item Revision) will open in which you can create the new managed schematic sheet by clicking Add an item then choosing Create Item » Managed Schematic Sheet to open the Create New Item dialog.

Tip

Before launching the command, ensure that the schematic you want to save to the server is the active document.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: