Altium NEXUS Documentation


Created: June 11, 2016 | Updated: April 11, 2017
Now reading version 1.1. For the latest, read: ExecuteFunction for version 5

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to execute the current function after all required objects involved in the function have been selected.


With a command running and the required objects selected, this command can be accessed from the CAMtastic Editor by:

  • Clicking the  button, on the Miscellaneous Tools drop-down () of the Utilities toolbar.
  • Using the Shift+F9 keyboard shortcut.
While performing most interactive commands, right-clicking also executes the function - at the point after selection of objects on which to operate. The prompts in the Status Bar will indicate when a right-click can be used in this way.


First, ensure that all objects required to be included in the current function (e.g. move, rotate, etc), are selected in the main design workspace.

After launching the command, the function will be executed.


  1. This command is only available when performing actions requiring object selection prior to execution.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: