Working with the Daisy Chain Stub Length Design Rule on a PCB in Altium NEXUS

Created: March 18, 2022 | Updated: March 18, 2022

This document is no longer available beyond version 21. Information can now be found here: Daisy Chain Stub Length Rule for version 5

Contents

Summary
Constraints
How Duplicate Rule Contentions are Resolved
Rule Application

All Contents

Rule category: High Speed

Rule classification: Unary

Summary

This rule specifies the maximum permissible stub length for a net with a daisy chain topology.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

Constraints

Default constraints for the Daisy Chain Stub Length rule.

Maximum Stub Length - the value for the maximum stub length allowed.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC and Batch DRC.

Printer-friendly version

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.