Altium NEXUS Documentation

Query_Lang-PCBFunctions_Fields_PadXSize_TopLayerPadXSize_TopLayer_AD

Created: August 2, 2022 | Updated: August 2, 2022
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose X Size (Top Layer) property complies with the Query.

Syntax

PadXSize_TopLayer : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(PadXSize_TopLayer) : Number – to specify a size in mil.
  • AsMM(PadXSize_TopLayer) : Number – to specify a size in mm.

Example Usage

PadXSize_TopLayer = 100
Returns all pad objects whose X Size (Top Layer) property is equal to 100 current measurement units.

PadXSize_TopLayer >= 4.064
Returns all pad objects whose X Size (Top Layer) property is greater than, or equal to, 4.064 current measurement units.

AsMils(PadXSize_TopLayer) > 80
Returns all pad objects whose X Size (Top Layer) property is greater than 80mil.

AsMM(PadXSize_TopLayer) Between 1.524 And 3.81
Returns all pad objects whose X Size (Top Layer) property is greater than or equal to 1.524mm and less than or equal to 3.81mm.

PadXSize_TopLayer <> 50
Returns all pad objects whose X Size (Top Layer) property is not equal to 50 current measurement units.

Tips

  1. For simple pads (with Stack Mode set to Simple) the X Size (Top Layer) property will be the same as the X Size (All Layers) property, since the specified size is used for all signal layers.
  2. The X Size (Top Layer) property is only defined for pad and via objects.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: