Altium Designer Documentation

CrossReference

Modified by Jason Howie on Aug 3, 2017

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action=AddToDocument

Summary

This command is used to add port cross-referencing information to the current schematic document.

Access

This command is accessed from the Schematic Editor by choosing the Reports » Port Cross Reference » Add To Sheet command, from the main menus.

The project must be compiled before this command becomes available to use.

Use

After launching the command a string will be included, where applicable, next to each port, detailing the sheet name and grid reference of the entity to which the port connects - other ports of the same name (when the Net Identifier Scope is Flat or Global), or a sheet entry in a parent sheet symbol (when the Net Identifier Scope is Hierarchical, or Strict Hierarchical).

Tips

  1. Cross reference information is added as a parameter to a port. The name of the parameter is simply CrossRef. With the parameter selected in the workspace, you can modify its display properties as required through the Parameters section of the Properties panel, which presents the full complement of properties for the parent port object.


Applied Parameters: ContextSensitive=True|Action=AddToDocument

Summary

This command is used to add port cross-referencing information to the current schematic document.

Access

This command is accessed from the Schematic Editor by right-clicking in the workspace - away from any design objects - and choosing the Sheet Actions » Port Cross Reference » Add To Sheet command, from the main menus.

The project must be compiled before this command becomes available to use.

Use

After launching the command a string will be included, where applicable, next to each port, detailing the sheet name and grid reference of the entity to which the port connects - other ports of the same name (when the Net Identifier Scope is Flat or Global), or a sheet entry in a parent sheet symbol (when the Net Identifier Scope is Hierarchical, or Strict Hierarchical).

Tips

  1. Cross reference information is added as a parameter to a port. The name of the parameter is simply CrossRef. With the parameter selected in the workspace, you can modify its display properties as required through the Parameters section of the Properties panel, which presents the full complement of properties for the parent port object.


Applied Parameters: Action=AddToProject

Summary

This command is used to add port cross-referencing information to all source schematic documents in the active project.

Access

This command is accessed from the Schematic Editor by choosing the Reports » Port Cross Reference » Add To Project command, from the main menus.

The project must be compiled before this command becomes available to use.

Use

After launching the command a string will be included, where applicable, next to each port, across all sheets in the active project, detailing the sheet name and grid reference of the entity to which the port connects - other ports of the same name (when the Net Identifier Scope is Flat or Global), or a sheet entry in a parent sheet symbol (when the Net Identifier Scope is Hierarchical, or Strict Hierarchical).

Tips

  1. Cross reference information is added as a parameter to a port. The name of the parameter is simply CrossRef. With the parameter selected in the workspace, you can modify its display properties as required through the Parameters section of the Properties panel, which presents the full complement of properties for the parent port object.


Applied Parameters: ContextSensitive=True|Action=AddToProject

Summary

This command is used to add port cross-referencing information to all source schematic documents in the active project.

Access

This command is accessed from the Schematic Editor by right-clicking in the workspace - away from any design objects - and choosing the Sheet Actions » Port Cross Reference » Add To Project command, from the main menus.

The project must be compiled before this command becomes available to use.

Use

After launching the command a string will be included, where applicable, next to each port, across all sheets in the active project, detailing the sheet name and grid reference of the entity to which the port connects - other ports of the same name (when the Net Identifier Scope is Flat or Global), or a sheet entry in a parent sheet symbol (when the Net Identifier Scope is Hierarchical, or Strict Hierarchical).

Tips

  1. Cross reference information is added as a parameter to a port. The name of the parameter is simply CrossRef. With the parameter selected in the workspace, you can modify its display properties as required through the Parameters section of the Properties panel, which presents the full complement of properties for the parent port object.


Applied Parameters: Action=RemoveFromDocument

Summary

This command is used to remove port cross-referencing information from the current schematic document.

Access

This command is accessed from the Schematic Editor by choosing the Reports » Port Cross Reference » Remove From Sheet command, from the main menus.

Use

After launching the command, the cross reference parameter (CrossRef) will be removed from each applicable port on the current sheet.


Applied Parameters: ContextSensitive=True|Action=RemoveFromDocument

Summary

This command is used to remove port cross-referencing information from the current schematic document.

Access

This command is accessed from the Schematic Editor by right-clicking in the workspace - away from any design objects - and choosing the Sheet Actions » Port Cross Reference » Remove From Sheet command, from the main menus.

Use

After launching the command, the cross reference parameter (CrossRef) will be removed from each applicable port on the current sheet.


Applied Parameters: Action=RemoveFromProject

Summary

This command is used to remove port cross-referencing information from all source schematic documents in the active project.

Access

This command is accessed from the Schematic Editor by choosing the Reports » Port Cross Reference » Remove From Project command, from the main menus.

Use

After launching the command, the cross reference parameter (CrossRef) will be removed from each applicable port, across all sheets in the active project.


Applied Parameters: ContextSensitive=True|Action=RemoveFromProject

Summary

This command is used to remove port cross-referencing information from all source schematic documents in the active project.

Access

This command is accessed from the Schematic Editor by right-clicking in the workspace - away from any design objects - and choosing the Sheet Actions » Port Cross Reference » Remove From Project command, from the main menus.

Use

After launching the command, the cross reference parameter (CrossRef) will be removed from each applicable port, across all sheets in the active project.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

听上去很棒!您知道我们为学生提供了特殊折扣么?欲知详情,请点击这里。.

同时,请填写下方表格申请免费试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。