Working with the Nets to Ignore Design Rule on a PCB in Altium NEXUS

現在、バージョン 3.0. をご覧頂いています。最新情報については、バージョン Working with the Nets to Ignore Design Rule on a PCB in Altium NEXUS の 4 をご覧ください。

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Rule category: Placement

Rule classification: Unary

Summary

This rule specifies which nets should be ignored.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

Constraints

None, the rule applies to all nets targeted by the scope (Full Query).

How Duplicate Rule Contentions are Resolved

Contentions are not possible.

Rule Application

Not currently observed by the DRC tool.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.