Query_Lang-PCBFunctions_AttributeChecks_TraceCopperHeightTraceCopperHeight_AD

This document is no longer available beyond version 4.0. Information can now be found here: TraceCopperHeight for version 5

Applies to NEXUS Client version: 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Attribute Checks

Summary

Returns all arc, fill, and track objects, on signal layers whose copper thickness complies with the Query.

The Copper Thickness for a signal layer is defined within the Layer Stack Manager (Design » Layer Stack Manager).
Arc, fill, and track objects on the Multi-Layer are not returned. Because different signal layers can have different Copper Thickness properties, a Copper Thickness property for the Multi-Layer is not always meaningful.

Syntax

TraceCopperHeight : Number

The entered thickness is always in units of mils, regardless of the measurement unit chosen for the board (1 mil = 0.001 inch).

Example Usage

TraceCopperHeight = 1.4
Returns all arc, fill, and track objects, on signal layers whose copper thickness is equal to 1.4mil.

TraceCopperHeight Between 1.1 And 1.5
Returns all arc, fill, and track objects, on signal layers whose copper thickness is greater than, or equal to, 1.1mil, and less than, or equal to, 1.5mil.

TraceCopperHeight >= 1.2
Returns all arc, fill, and track objects, on signal layers whose copper thickness is greater than, or equal to, 1.2mil.

TraceCopperHeight < 1.3
Returns all objects except arc, fill, and track objects, on signal layers whose copper thickness is greater than, or equal to, 1.3mil.

TraceCopperHeight = 2.8 || (IsArc Or IsFill Or IsTrack && OnMultiLayer)
Returns all arc, fill, and track objects, on signal layers whose copper thickness is equal to 2.8mil, and all arc, fill, and track objects on the Multi-Layer.

Tips

  1. This function is an alias for the TraceHeight function.