Query_Lang-PCBFunctions_Fields_Pad_CornerRadius_MidLayer18Pad_CornerRadius_MidLayer18_AD

This document is no longer available beyond version 4.0. Information can now be found here: Pad_CornerRadius_MidLayerN for version 5

Applies to NEXUS Client version: 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Pad Corner Radius (%) (Mid Layer 18) property complies with the Query.

Syntax

Pad_CornerRadius_MidLayer18 = CornerRadius_String
Pad_CornerRadius_MidLayer18 <> CornerRadius_String

CornerRadius_String specifies the corner radius, expressed as a percentage.

Example Usage

Pad_CornerRadius_MidLayer18 = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Mid Layer 18) property equals 50%.

Pad_CornerRadius_MidLayer18 <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Mid Layer 18) property equals 30%.

Tips

  1. The single quote characters (') at the start and end of CornerRadius_String are mandatory.
  2. For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Mid Layer 18) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
  3. For Top-Middle-Bottom pads (with Stack Mode set to Top-Middle-Bottom) the Pad Corner Radius (%) (Mid Layer 18) property will be the same as the Pad Corner Radius (%) (Mid Layer 1) property, since the Corner Radius specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
  4. The Pad Corner Radius (%) (Mid Layer 18) property is only defined for pad objects.