Связаться с нами
Связаться с нашими Представительствами напрямую
Parent page: Multi-board Schematic Objects
A Line is a graphic object that can be placed on a multi-board Design schematic document.
Lines are available for placement in the multi-board schematic editor as follows:
After launching the command, the cursor will change to a cross-hair and the editor will enter Line placement mode. Placement is made by performing the following actions:
The graphical method of editing allows a placed Line object to be selected in the design space and moved or its start/end point locations changed.
When a Line object is selected, editing handles/nodes become available at its start and end points.
A selected Line. Click and drag the Line to reposition it on the drawing document.
Properties page: Line Properties
The non-graphical method of editing a Line is available in the Multi-board Properties panel, which provides editable property fields for the item that is currently selected in the design space.
The Properties panel when a Line object is selected.
To open the Properties panel and access the properties of a placed Line:
If the Properties panel is already active, click on the Line to access its properties in the panel.
The Properties panel supports multiple object editing where the property settings that are identical in all currently selected objects may be modified. When multiples of the same object type are selected, a Properties panel field entry can be edited for all selected objects. If values of a property are different for objects in the selection, the appropriate field will be shown as an asterisk (*); a new property value will be applied to all selected objects.
Связаться с нашими Представительствами напрямую