Вы просматриваете версию 3.2. Для самой новой информации, перейдите на страницу для версии 4
The Multi-Channel tab of the Project Options dialog
This tab of the Project Optionsdialog enables you to define the room naming scheme and component designator format for use with multi-channel designs. Multi-channel design is the ability to reference the same sub-sheet in the project multiple times. This can be done by placing multiple sheet symbols that reference the same sub-sheet, or by including the Repeat keyword in the designator of a Sheet Symbol to instantiate it multiple times.
Altium NEXUS offers true multi-channel design, meaning that you can reference single sheets repeatedly in a project. Any changes that might need to be made can be applied in one place and recompiling the project then propagates those changes through each instantiation. Altium NEXUS not only supports multiple channels, it also allows them to be nested.
The mapping from the single logical component on the schematic to the multiple physical instances on the PCB is controlled by the multi-channel designator scheme defined on this tab.
This is one of multiple tabs available when configuring the options for a project accessed from within the ProjectOptions dialog. To access this dialog:
Click Project» Project Options in the Schematic or PCB Editor.
Right-click on the Project entry on the Projects panel then click Project Options from the context menu.
Room Naming Style - use this field to specify the style that is to be used to name the rooms. As you select a style from the list, the image below is updated to reflect the naming convention that will appear in the design. When the design is compiled, a room is created for each sheet in the design, including each bank and each lower-level channel. There are five styles available — two flat and three hierarchical (those including path):
Flat Numeric With Names
Flat Alpha With Names
Numeric Name Path
Alpha Name Path
Mixed Name Path
Hierarchical channel names are formed by concatenating all channelized sheet symbol designators (ChannelPrefix + ChannelIndex) in the relevant channel path hierarchy.
Level Separator for Paths - use this field to specify the required character/symbol for separating the path information when using the hierarchical naming styles (those styles that include the path). By default, the underscore character (_) will be used.
There is no restriction on the entry used for the level separator, although to retain visual clarity, it is advisable to keep it to a single non-alphanumeric character.
Preview - as you make changes to the Room Naming Style and/or Designator Format, the image in this region dynamically updates to reflect the naming convention that will appear in the design. The image gives an example of a 2 x 2 nested channel design. The larger cross-hatch regions represent the two upper-level channels (or banks) and the shaded regions within represent the lower-level channels (with two sample components shown in each).
Designator Format - use this field to specify the format used when assigning designators to the design components. The following eight predefined formats are available from the field's drop-down list: five flat and three that can be used in a hierarchical context (containing the channel naming):
The flat designator formats name each component designator in a linear progression, starting from the first channel. The hierarchical formats include the Room name ($RoomName) in the designator for a component. If the Room Naming Style chosen is one of the two possible flat styles, then the style for the component designator will also be flat. However, if a hierarchical style has been chosen for room naming, the component designator will also be hierarchical because the path information will be included in the format.
The Room Naming Style is only relevant for component naming if the $RoomName string is included in the Designator Format.
Defining Your Own Designator Format
You also can define your own component designator format by typing directly into the Designator Format field. The following keywords can be used when constructing the format string:
$RoomName - this is the name of the associated channel as determined by the style chosen in the Room Naming Style field.
$Component- this is the component logical designator.
$ComponentPrefix - this is the component logical designator prefix (e.g., U for U1).
$ComponentIndex - this is the component logical designator index (e.g., 1 for U1).
$ChannelPrefix - this is the logical sheet symbol designator.
$ChannelIndex - this is the channel index.
$ChannelAlpha - this is the channel index expressed as a character.
Set To Installation Defaults - click to set all options to installation defaults.
The alpha indexing for a channel is only really useful if your design contains less than 26 channels in total or if you are using a designator format that is hierarchical in nature.
You must recompile your project in order for any changes made to room and/or component designator formats to take effect.
When a multi-channel design is compiled, tabs are displayed along the bottom of the schematic sheet in the design window, one for each channel (or bank). The tab names are the sheet symbol names plus the channel number, e.g., BANKA. These are the compiled views (physical views) of the design, while the logical design remains as before on the Editor tab.