Altium NEXUS Documentation

Compile

Последнее изменение: Jason Howie; 11.04.2017

Parent page: WorkspaceManager Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action=Compile|ObjectKind=Document

Summary

This command is used to compile (analyze) the active document.

Access

This command is accessed from the Schematic Editor by choosing the Project » Compile Document <DocumentName> command, from the main menus.

Use

After launching the command, the active document will be compiled. Any electrical and drafting violations that are detected by the Compiler will be listed as warnings and/or errors in the Messages panel.

Tips

  1. The Compiler uses the options defined on the Error Reporting and Connection Matrix tabs of the Options for Project dialog, when checking the source document for violations.
  2. Use the Navigator panel to peruse the compiled document.


Applied Parameters: Action=Compile|ObjectKind=Project

Summary

Before the design data is transferred to PCB layout, the design must first be verified. In Altium NEXUS, checking the design is done by compiling the project. This command is used to compile all source documents of the active project.

Access

This command is accessed from the Schematic Editor by choosing the Project » Compile Project command, from the main menus.

Use

After launching the command, the active project will be compiled. The compilation process performs four functions:

  1. Instantiates the design hierarchy.
  2. Establishes net connectivity between all the design sheets.
  3. Builds an internal Unified Data Model (UDM) of the design.
  4. Checks for logical, electrical and drafting errors between the UDM and compiler settings.

With respect to point 4, any violations that are detected by the Compiler will be listed as warnings and/or errors in the Messages panel.

Tips

  1. A project is currently active when one of its associated design documents is active in the main design window.
  2. The Compiler uses the options defined on the Error Reporting and Connection Matrix tabs of the Options for Project dialog, when checking the source documents for violations.
  3. Use the Navigator panel to peruse the connectivity model for the compiled source documents.


Applied Parameters: Action=Compile|ObjectKind=All

Summary

Before the design data is transferred to PCB layout, the design must first be verified. In Altium NEXUS, checking the design is done by compiling the project. This command is used to compile all source documents of all open projects.

Access

This command can be accessed by:

  • Choosing the Project » Design Workspace » Compile All Projects command, from the main menus.
  • In the Projects panel, clicking the panel's Workspace button and choosing the Compile All Projects command from the context menu.

Use

After launching the command, all open projects will be compiled, in turn. In each case, the compilation process performs four functions:

  1. Instantiates the design hierarchy.
  2. Establishes net connectivity between all the design sheets.
  3. Builds an internal Unified Data Model (UDM) of the design.
  4. Checks for logical, electrical and drafting errors between the UDM and compiler settings.

With respect to point 4, any violations that are detected by the Compiler will be listed as warnings and/or errors in the Messages panel.

Tips

  1. The Compiler uses the options defined on the Error Reporting and Connection Matrix tabs of the Options for Project dialog, when checking the source documents for violations.
  2. Use the Navigator panel to peruse the connectivity model for the compiled source documents, with respect to the focused project. Note that when two or more projects are open in the active Design Workspace, use of this command passes focus to the last project listed in the Projects panel.
  3. All currently open projects can also be compiled by clicking the left-hand side of the  button on the Projects panel.


Applied Parameters: Action=Compile|ObjectKind=FocusedDocument

Summary

This command is used to compile (analyze) the focused document.

Access

This command can be accessed by:

  • Right-clicking over the entry for a schematic document in the Projects panel, and choosing the Compile Document <DocumentName> command from the context menu.
  • Focusing the entry for a schematic document in the Projects panel, then clicking the panel's Project button and choosing the Compile Document <DocumentName> command from the context menu.

Use

First, ensure that the document you wish to compile is the focused document in the Projects panel.

After launching the command, the focused document will be compiled. Any electrical and drafting violations that are detected by the Compiler will be listed as warnings and/or errors in the Messages panel.

Tips

  1. An entity in the Projects panel is focused either by clicking on it, or right-clicking on it. To distinguish it as being the focused entry, it appears with a dotted border.
  2. The Compiler uses the options defined on the Error Reporting and Connection Matrix tabs of the Options for Project dialog, when checking the source document for violations.
  3. Use the Navigator panel to peruse the compiled document.


Applied Parameters: Action=Compile|ObjectKind=FocusedProject

Summary

Before the design data is transferred to PCB layout, the design must first be verified. In Altium NEXUS, checking the design is done by compiling the project. This command is used to compile all source documents of the focused project.

Access

This command can be accessed by:

  • Right-clicking over the entry for a project in the Projects panel, and choosing the Compile Project command from the context menu.
  • Focusing the entry for a project in the Projects panel, then clicking the panel's Project button and choosing the Compile Project command from the context menu.

Use

First, ensure that the project you wish to compile is the focused project in the Projects panel.

After launching the command, the focused project will be compiled. The compilation process performs four functions:

  1. Instantiates the design hierarchy.
  2. Establishes net connectivity between all the design sheets.
  3. Builds an internal Unified Data Model (UDM) of the design.
  4. Checks for logical, electrical and drafting errors between the UDM and compiler settings.

With respect to point 4, any violations that are detected by the Compiler will be listed as warnings and/or errors in the Messages panel.

Tips

  1. An entity in the Projects panel is focused either by clicking on it, or right-clicking on it. To distinguish it as being the focused entry, it appears with a dotted border.
  2. The Compiler uses the options defined on the Error Reporting and Connection Matrix tabs of the Options for Project dialog, when checking the source documents for violations.
  3. Use the Navigator panel to peruse the connectivity model for the compiled source documents.


Applied Parameters: Action=Recompile|ObjectKind=Project

Summary

This command is used to force a compile of all source documents of the active project, regardless of whether any documents have changed since the last compilation or not.

Access

This command is accessed from the Schematic Editor by choosing the Project » Recompile Project command, from the main menus.

Use

After launching the command, the active project will be recompiled. The compilation process performs four functions:

  1. Instantiates the design hierarchy.
  2. Establishes net connectivity between all the design sheets.
  3. Builds an internal Unified Data Model (UDM) of the design.
  4. Checks for logical, electrical and drafting errors between the UDM and compiler settings.

With respect to point 4, any violations that are detected by the Compiler will be listed as warnings and/or errors in the Messages panel.

Tips

  1. A project is currently active when one of its associated design documents is active in the main design window.
  2. The Compiler uses the options defined on the Error Reporting and Connection Matrix tabs of the Options for Project dialog, when checking the source documents for violations.
  3. Use the Navigator panel to peruse the connectivity model for the compiled source documents.


Applied Parameters: Action=Recompile|ObjectKind=All

Summary

This command is used to force a compile of all source documents of all open projects, regardless of whether any documents have changed since the last compilation or not.

Access

This command can be accessed by:

  • Choosing the Project » Design Workspace » Recompile All Projects command, from the main menus.
  • In the Projects panel, clicking the panel's Workspace button and choosing the Recompile All Projects command from the context menu.

Use

After launching the command, all open projects will be recompiled, in turn. In each case, the compilation process performs four functions:

  1. Instantiates the design hierarchy.
  2. Establishes net connectivity between all the design sheets.
  3. Builds an internal Unified Data Model (UDM) of the design.
  4. Checks for logical, electrical and drafting errors between the UDM and compiler settings.

With respect to point 4, any violations that are detected by the Compiler will be listed as warnings and/or errors in the Messages panel.

Tips

  1. The Compiler uses the options defined on the Error Reporting and Connection Matrix tabs of the Options for Project dialog, when checking the source documents for violations.
  2. Use the Navigator panel to peruse the connectivity model for the compiled source documents, with respect to the focused project. Note that when two or more projects are open in the active Design Workspace, use of this command passes focus to the last project listed in the Projects panel.


Applied Parameters: Action=Recompile|ObjectKind=FocusedProject

Summary

This command is used to force a compile of all source documents of the focused project, regardless of whether any documents have changed since the last compilation or not.

Access

This command can be accessed by:

  • Right-clicking over the entry for a project in the Projects panel, and choosing the Recompile Project command from the context menu.
  • Focusing the entry for a project in the Projects panel, then clicking the panel's Project button and choosing the Recompile Project command from the context menu.

Use

First, ensure that the project you wish to recompile is the focused project in the Projects panel.

After launching the command, the focused project will be recompiled. The compilation process performs four functions:

  1. Instantiates the design hierarchy.
  2. Establishes net connectivity between all the design sheets.
  3. Builds an internal Unified Data Model (UDM) of the design.
  4. Checks for logical, electrical and drafting errors between the UDM and compiler settings.

With respect to point 4, any violations that are detected by the Compiler will be listed as warnings and/or errors in the Messages panel.

Tips

  1. An entity in the Projects panel is focused either by clicking on it, or right-clicking on it. To distinguish it as being the focused entry, it appears with a dotted border.
  2. The Compiler uses the options defined on the Error Reporting and Connection Matrix tabs of the Options for Project dialog, when checking the source documents for violations.
  3. Use the Navigator panel to peruse the connectivity model for the compiled source documents.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе:
Бесплатная пробная версия Altium Designer
Бесплатная пробная версия Altium Designer
Давайте приступим. Для начала, Вы или Ваше предприятие уже используете Altium Designer?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

В таком случае, для чего Вам необходима пробная лицензия?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вам для этого не нужна пробная лицензия.

Нажмите кнопку ниже, чтобы загрузить установщик самой новой версии Altium Designer

Загрузить установщик Altium Designer

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Пожалуйста, заполните форму ниже, чтобы получить ценовое предложение.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Если Ваша подписка Altium активна, у Вас нет необходимости в пробной лицензии.

Если у Вас нет активной подписки Altium, пожалуйста, заполните форму ниже, чтобы получить пробную версию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Для чего Вы хотите попробовать Altium Designer?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вы нашли нужное место! Пожалуйста, заполните форму ниже, чтобы начать использование пробной версии.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Вы можете загрузить бесплатную лицензию средства просмотра Altium Designer Viewer сроком действия 6 месяцев.

Пожалуйста, заполните форму ниже, чтобы запросить эту лицензию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Замечательно! Создавать новое - отличное занятие. У нас есть превосходная программа для Вас.

Upverter - бесплатная платформа, разработанная специально для любителей проектирования.

Нажмите здесь, чтобы попробовать!

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вы можете загрузить бесплатную лицензию средства просмотра Altium Designer Viewer сроком действия 6 месяцев.

Пожалуйста, заполните форму ниже, чтобы запросить эту лицензию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.