Altium NEXUS Documentation

WorkspaceManager_Cmd-GenerateSymbolGenerateSymbol_AD

Created: 27.07.2015 | Updated: 11.04.2017
На этой странице документации упоминается Altium NEXUS/NEXUS Client (часть развернутого решения NEXUS), поддержка которого прекращена. Все ваши потребности в проектировании печатных плат, управлении данными и совместной работе теперь могут быть реализованы с помощью Altium Designer (с подпиской Altium Designer Enterprise) и подключенного рабочего пространства Altium 365 Workspace. Посетите страницу часто задаваемых вопросов (FAQs) для получения дополнительной информации.

Parent page: WorkspaceManager Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: None

Summary

This command is used to create a new schematic component symbol from the active schematic sheet, with the ports on that sheet becoming pins of the component.

Access

This command is accessed from the Schematic Editor by choosing the Design » Create Component From Sheet command, from the main menus.

Use

After launching the command, the Symbol Options dialog will appear. Use this dialog to define the symbol height and width, the length of its pins, and a style for its pins, in relation to the ports on the source sheet.

After clicking OK in the dialog, the new component will be created, named after the schematic document, in a new Schematic Library document (Schlib1.SchLib). The library will be opened as the active document, and the new component presented as the active component within that library.

Tips

  1. If the source schematic sheet contains no ports, the new component will still be created, but there will be no symbol graphics.


Applied Parameters: ContextSensitive=True

Summary

This command is used to create a new schematic component symbol from the active schematic sheet, with the ports on that sheet becoming pins of the component.

Access

This command is accessed from the Schematic Editor by right-clicking within the main design workspace - away from design objects - and choosing the Sheet Actions » Create Component From Sheet command, from the context menu.

Use

After launching the command, the Symbol Options dialog will appear. Use this dialog to define the symbol height and width, the length of its pins, and a style for its pins, in relation to the ports on the source sheet.

After clicking OK in the dialog, the new component will be created, named after the schematic document, in a new Schematic Library document (Schlib1.SchLib). The library will be opened as the active document, and the new component presented as the active component within that library.

Tips

  1. If the source schematic sheet contains no ports, the new component will still be created, but there will be no symbol graphics.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: