Choose Height Above Board Top Surface
Created: February 6, 2019 | Updated: February 6, 2019
The Choose Height Above Board Top Surface dialog
This dialog allows you to specify the height of a nominated point on a chosen 3D Body, relative to the top surface of the board.
This dialog is accessed in 3D Layout Mode from the PCB or PCB Library editor by clicking Tools » 3D Body Placement » Set Body Height from the main menus then double-clicking on the placed 3D Body.
- Original - the current value for the height of the nominated point on the chosen 3D model in relation to the board's top surface.
- Board Surface - enable this option to have the nominated point on the chosen 3D model flush with the top surface of the board (0 height).
- Custom - enable this option to specify a custom height for the nominated point on the chosen 3D model above (positive value) or below (negative value) the board's top surface.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.