Altium NEXUS Documentation

Arc

Modified by Susan Riege on Feb 22, 2019
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro
All Contents

Parent page: Schematic Objects

Two placed Arcs (the one on the right is a Full Circle Arc)

Summary

An Arc is a non-electrical drawing primitive. It is essentially a curved line segment that can be used when creating graphical symbols, custom sheet borders and title blocks, etc. A placed Circle is an Arc object that spans 360° (has the same start and end angle).

Availability

Arcs are available for placement in both Schematic and Schematic Library Editors:

  • Schematic Editor - the following commands are available:
    • Choose Place » Drawing Tools » Arc from the main menus to place an arc with full control over start and end angles.
    • Choose Place » Drawing Tools » Full Circle from the main menus to place a full circle arc where start and end angles are fixed at 0° and 360°.
    • Click the Arc button () or Full Circle button () in the graphic objects drop-down on the Active Bar located at the top of the workspace. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
    • Right-click in the workspace then choose Place » Drawing Tools » Arc or Place » Drawing Tools » Full Circle from the context menu.
  • Schematic Library Editor - the following commands are available:
    • Choose Place » Arc from the main menus to place an arc with full control over start and end angles.
    • Choose Place » Full Circle from the main menus to place a full circle arc where start and end angles are fixed at 0° and 360°.
    • Click the Arc button () or Full Circle button () in the graphic objects drop-down on the Active Bar menu, located at the top of the workspace. Click and hold an Active Bar menu button to access other related commands. Once a command has been used, it will become the topmost item on the Active Bar menu.
    • Right-click then choose Place » Arc or Place » Full Circle from the context menu.

Placement

After launching the command, the cursor will change to a cross-hair indicating arc placement mode. Placement is made by performing the following sequence of actions:

  1. Click or press Enter to anchor the center point of the arc.
  2. Move the cursor to adjust the radius of the arc, then click or press Enter to set it.
  3. Move the cursor to adjust the start angle for the arc, then click or press Enter to anchor it.
  4. Move the cursor to adjust the end angle for the arc, then click or press Enter to anchor it and complete placement of the arc.
  5. Continue placing further arcs or right-click or press Esc to exit placement mode.
Steps 3 and 4 are not applicable when placing full circle arcs.

Additional actions that can be performed during placement while the arc is still floating on the cursor and before the center point of the arc is anchored are:

  • Press the Tab key to pause the placement and access the Arc mode of the Properties panel, from where its line properties can be changed on-the-fly. Click the workspace pause button overlay () to resume placement.
  • Press the Alt key to constrain the direction of movement to the horizontal or vertical axis depending on the initial direction of movement. 
  • Press the Spacebar to rotate the arc counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in increments of 90°.
  • Press the X or Y keys to mirror the arc along the X-axis or Y-axis.

While attributes can be modified during placement (Tab to access the Properties panel), keep in mind that these will become the default settings for further placement unless the Permanent option on the Schematic – Defaults page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Graphical Editing

This method of editing allows you to select a placed arc object directly in the workspace and change its size, shape or location graphically.

When an arc object is selected, the following editing handles are available:

Selected Arcs (Full Circle Arc on right).

  • Click and drag A to adjust the radius.
  • Click and drag B to adjust the arc end points (start and end angles).
  • Click on the arc line – away from editing handles – and drag to reposition it. While dragging, the arc can be:
    • rotated (Spacebar for clockwise and Shift+Spacebar for counterclockwise) about the cursor.
    • mirrored (X or Y keys to mirror along the X-axis or Y-axis) relative to the cursor position.
    • moved in only the X or Y plane (hold Alt), depending on which direction the cursor is first moved from its starting point.
    • duplicated (hold Shift, then drag) to a new Arc object.
If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the Schematic – Graphical Editing page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Click the locked object to select it then disable the Locked property in the List panel or disable the Protect Locked Objects option to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available:

Via the Properties Panel

Properties page: Arc Properties

This method of editing uses the associated Properties panel mode to modify the properties of an arc object.

The Arc mode of the Properties panel

During placement, the Arc mode of the Properties panel can be accessed by pressing the Tab key.

After placement, the Arc mode of the Properties panel can be accessed in one of the following ways:

  • Double-clicking on the placed arc object line.
  • Placing the cursor over the arc object line, right-clicking then choosing Properties from the context menu.
  • If the Properties panel is already active, by selecting the arc object.
Editing Multiple objects

The Properties panel supports multiple object editing, where the property settings that are identical in all currently selected objects may be modified. When multiples of the same object type are selected manually, via the Find Similar Objects dialog or through a Filter or List panel, a Properties panel field entry that is not shown as an asterisk (*) may be edited for all selected objects.

The panel with two arc objects selected. Only the X position and Start Angle properties differ and are not editable.

Via a List Panel

Panel pages: SCH List, SCHLIB List, SCH Filter, SCHLIB Filter

List panel displays design object types from one or more documents in tabular format, enabling quick inspection and modification of object attributes.

Used in conjunction with appropriate filtering – by selecting object types (using the panel's Include options), or by using the applicable Filter panel or the Find Similar Objects dialog – it enables the display of just those objects falling under the scope of the active filter. The properties for the listed objects may then be edited directly in the List panel.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。