Altium NEXUS Documentation

Configuring Schematic Bus Entry Object Properties in Altium NEXUS

Created: December 13, 2018 | Updated: December 13, 2018
您正在阅读的是2.0版本。 关于最新版本,请前往阅读4版本

Contents

All Contents

Parent page: Bus Entry

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Bus Entry object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Bus Entry object properties are available for editing in the Properties panel when a placed Bus Entry is selected in the workspace.

The Bus Entry default settings in the Preferences dialog and the Bus Entry mode of the Properties panel   The Bus Entry default settings in the Preferences dialog and the Bus Entry mode of the Properties panel         The Bus Entry default settings in the Preferences dialog and the Bus Entry mode of the Properties panel

Properties

  • Start (X/Y) 
    • X (first field) - the current X (horizontal) coordinate of the reference point of the object relative to the current workspace origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
    • Y (second field) - The current Y (vertical) coordinate of the reference point of the object relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
  • End (X/Y) -
    • X (first field) - the current X (horizontal) coordinate of the reference point of the object relative to the current workspace origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
    • Y (second field) - The current Y (vertical) coordinate of the reference point of the object relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
  • Size (X/Y) - the bus entry size.
  • ​Width - use the drop-down to select the desired width. Choices are: Smallest, Small, Medium, and Large. Click the color box to select the desired color for the object.
  • Color - click the color box to select the desired color for the object.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: