Applied Parameters: ObjectKind=Project|SaveMode=SaveAs
This command is used to save a copy of the currently active project, with a new name (if required), and to a specified location on the hard disk.
With a document for the required project open as the active document, this command is accessed from that document's editor by choosing the File » Save Project As command, from the main menus.
First, ensure that one of the target project's associated design documents is open as the active document in the main design window.
After launching the command, the standard Windows Save As dialog appears. Use this dialog to browse to a particular destination in which to save the project file, and give the file a new name (if required).
The newly saved project will be opened in place of the original project as the active project.
- Only the project document is saved. The constituent design documents are not saved by this command.
- The project document can be placed anywhere on the hard disk - the paths to the constituent design files will be updated accordingly.