WorkspaceManager_Dlg-ParameterVariationFormParameter Variation_AD

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Parameter Variation dialogThe Parameter Variation dialog

Summary

This dialog allows a user to view, edit or disable a varied parameter used for a component Variant.

Access

The Parameter Variation dialog is accessed by performing the following steps:

  1. In a compiled project that includes variants, switch to a variant using the drop-down field in the Variants toolbar.
  2. Switch the Schematic Editor from the base design view (Editor tab) to the compiled view tab, located at the bottom left-hand side of the workspace.
  3. Double-click on a component's visible, varied parameter (for example, its Comment).

Options/Controls

  • Name – this is a non-editable field that is populated by the logical, as opposed to physical, component parameter information (the Name of the parameter).
    • Visible – when this option is enabled, the parameter is displayed (non-editable; set in the base design).
    • Lock – when this option is enabled, the parameter cannot be reassigned (non-editable; set in the base design).
  • Value – this is a non-editable field that is populated with the logical component parameter data (the Value of the parameter).
    • Visible – when this option is enabled, the value is displayed (non-editable; set in the base design).
    • Lock – when this option is enabled, the value cannot be reassigned (non-editable; set in the base design).
  • Variation (will be saved in <projectname>)
    • Varied Value – uncheck this option to disable the parameter variation. When checked, varied value is active, and can be edited in the associated textbox.​
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.