Altium Designer Documentation

ClearViolations

Using Altium Documentation
Created: September 18, 2017 | Updated: October 13, 2017
Now reading version 20.1. For the latest, read: ClearViolations for version 21
Applies to Altium Designer versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: MultiBoardAssembly Commands

The following pre-packaged resource, derived from this base command, is available:

Clear Violations


Applied Parameters: None

Summary

This feature is used to clear violations from the workspace in the active Multi-board Assembly document (*.MbaDoc). Violations are the result of having run collision checking for the assembly.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command is accessed from the Multi-board Assembly Editor by choosing the Tools » Clear Violations command from the main menus.

Use

After launching the command, all violations highlighted in the workspace after having run collision checking, will be cleared.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: