Component Rule Check

Now reading version 17.0. For the latest, read: Component Rule Check for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1


The Component Rule Check Dialog.

Summary

This dialog allows the designer to specify rules to check a component which is currently active in the PCB library.

Access

From the PCB Library Editor, select Reports » Component Rule Check from the toolbar to access this dialog.

Options/Controls

Duplicate

  • Pads - Enable this option to check for components with duplicate pads.
  • Primitives - Enable this option to check for components with duplicate primitives.
  • Footprints - Enable this option to check for components with duplicate footprints.

Constraints

  • Missing Pad Names - Enable this option to check for components with missing pad names.
  • Mirrored Component - Enable this option to check for components that are mirrored.
  • Offset Component Reference -  Enable this option to check for components with the component reference offset.
  • Shorted Copper - Enable this option to check for components with shorted copper.
  • Unconnected Copper - Enable this option to check for components with unconnected copper.
  • Check All Components -  Enable this option to check all components in the library.

After clicking the OK button a Component Rule Check Report with the extension ERR will be generated, listing the violations based on the options you have enabled.

Note

The features available depend on your level of Altium Designer Software Subscription.