Equalize Nets

Now reading version 21. For the latest, read: Equalize Nets for version 22

The Equalize Nets dialog
The Equalize Nets dialog

Summary

The Equalize Nets dialog is used to match the length of nets identified by the Matched Lengths design rule. Before launching the dialog, ensure you have set up a Matched Lengths design rule covering the nets whose length you wish to equalize.

Access

The dialog is accessed from the PCB editor by clicking Tools » Equalize Net Lengths from the main menus. See the Equalize Net Lengths command for more information.

Options/Controls

  • Style - specify the corner style for the tracks. Options include 90 Degrees, 45 Degrees, and Rounded.
  • Gap - specify the gap between two adjacent tracks.
  • Amplitude - specify the tuning amplitude when equalizing nets.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.