Altium Designer Documentation

Find Similar Objects (PCB)

Modified by Tiffany Cullen on Nov 19, 2019


The Find Similar Objects dialog

Summary

The Find Similar Objects dialog allows you to set up search criteria for the Find Similar Objects (FSO) process. This process uses the attributes of a target object as a reference for finding several other objects with similar characteristics.

Access

The dialog is accessed from the PCB Editor or PCB Library Editor in the following ways:

  • Use the Edit » Find Similar Objects command from the main menus then click on an object in the workspace. This object will be used as the template for finding similar objects.
  • Press Shift+F then click on an object in the workspace to use as the template.
  • Right-click over a placed object in the workspace then choose the Find Similar Objects command from the context menu.

Options/Controls

The dialog is divided into two primary sections; the upper section consists of a grid that lists the attributes of the template (or reference) object; the lower section consists of a group of check boxes that define what will happen once the Apply or OK button is clicked.

Use the Apply button to test and fine tune search criteria to yield the desired results without closing the dialog.

Attribute Grid

The data displayed in each region (Kind, Object Specific, and Graphical) will depend upon the object that was clicked on while accessing the dialog. If a 3D Body object is selected, an additional 3D Model Properties region will be available.

The grid of attributes for the reference object is divided into three columns:

  • Left Column - lists the names of all the attributes of the reference object.
  • Center Column - lists the value of those attributes taken from the reference object.
To search for objects with different values, enter the search pattern into the attribute value column directly; the '*' character can be used as a wildcard for finding any group of characters. For example, C* will find C1, C2, C20, C397, Cap5, etc. Edits made to the attribute value in the dialog will not alter the attributes of the reference object.
  • Right Column - provides a drop-down list of options used for specifying how the associated attribute should be used to find similar objects. The options are:
    • Any - find similar objects with any value for this attribute.
    • Same - find similar objects with the same value set for this attribute as that of the reference object.
    • Different - find similar objects with a different value set for this attribute as that of the reference object.

Scoping and Highlighting Options

The dialog provides the following highlighting options:

  • Zoom Matching - enable this option to have all objects matching the search criteria zoomed and centered (where possible) in the workspace.
  • Create Expression - enable this option to create an expression that matches the criteria specified by the dialog, and enter it into the PCB Filter panel. The PCB Filter panel will be opened if it is not already. This option makes it possible to use this dialog as a quick way of constructing complicated filtering operations.
  • Select Matched - enable this option to have all objects matching the search criteria selected in the workspace.
  • Filtering Drop-Down - use this field to set the style of filtering applied in the workspace. Choose from the following options:
    • Normal - choose this option to have those objects matching the search criteria appear fully visible in the workspace. The appearance of non-matching objects remains unchanged.
    • Mask - choose this option to have those objects matching the search criteria appear fully visible in the workspace with all non-matching objects being made monochrome. With this option applied, non-matching objects will be unavailable for selection and editing.
    • Dim - choose this option to have those objects matching the search criteria appear fully visible in the workspace with all non-matching objects retaining their colors, but being shaded (dimmed). With this option applied, non-matching objects will still be available for selection and editing.
  • Clear Existing - enable this option to clear any existing selection or editing mask before performing the search. Disable this option if doing successive Find Similar Objects searches and it is desirable for the results to accumulate.
  • Open Properties - enable to open the Properties panel.
  • Whole Library - this field is available only when the dialog is accessed from the PCB Library editor. Use the option to determine the scope of the filtering, either within the active component only (disabled) or across all components in the library (enabled).
To clear filtering currently applied to the workspace through use of the Find Similar Objects feature, use the Shift+C shortcut. Alternatively, right-click within the workspace and choose the Clear Filter command.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.