Room containing No Net - Locked Objects
Created: February 10, 2016 | Updated: June 19, 2017
| Applies to versions: 15.1, 16.0, 16.1 and 17.0
Now reading version 17.0. For the latest, read: Room containing No Net - Locked Objects for version 22
The Room containing No Net / Locked Objects dialog.
Summary
When moving a room, this dialog allows designers to confirm which objects attached to that room they would like moved as well.
Access
This dialog can be accessed in the following ways:
- From the toolbar select Design » Rooms » Move Room and click on a room.
- Right-click on a room in the workspace and select Room Actions » Move Room from the context menu.
Options/Controls
- No Net Objects - Enable to move No Net Objects with the room.
- Locked Objects - Enable to move Locked Objects with
- Don't Ask Me About Moving Room's Locked/No Net Objects Until Next PCB Session (Use Currently Selected Settings) - Enable this option to save the selected settings and continue using them for the rest of your PCB session. The dialog will not open again unless a new session is started.
