Room containing No Net - Locked Objects
Created: February 28, 2018 | Updated: March 01, 2018
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
Now reading version 18.1. For the latest, read: Room containing No Net - Locked Objects for version 22
The Room containing No Net / Locked Objects dialog
Summary
The Room containing No Net / Locked Objects dialog allows you to confirm which objects attached to a room to move when moving a room.
Access
This dialog can be accessed in the following ways:
- From the main menus, select Design » Rooms » Move Room then click on a room.
- Right-click on a room in the workspace then select Room Actions » Move Room from the context menu.
Options/Controls
- No Net Objects - enable to move objects with no nets with the room.
- Locked Objects - enable to move locked objects with the room.
- Don't ask me about moving room's locked/no net objects until next PCB session (use currently selected settings) - enable this option to save the selected settings and continue using them for the rest of your PCB session. The dialog will not open again unless a new session is started.
