Altium Designer Documentation

Net Name

Created: February 8, 2023 | Updated: February 8, 2023
Applies to Altium Designer version: 22

The Net Name dialogThe Net Name dialog


The Net Name dialog allows you to quickly jump to a specific Net within the design space by specifying the Net's name.

If the target Net is already displayed within the main design window, the cursor will jump to the nearest design object that is a member of that Net. If the Net is out of view, the cursor will be positioned at the nearest design object that is a member of that Net, centered within the main design window (where possible).


The dialog is accessed from the PCB Editor by clicking Edit » Jump » Net from the main menus.

You can also use the J, N keyboard sequence directly from within the focused design space.


  • Net Name - use this field to specify the name of the Net to which you want to jump. The name of the Net must be entered in its entirety. Alternatively, enter ? then click OK. The Nets Loaded dialog opens, listing all Nets for the design. Use this dialog to quickly locate the Net to which you want to jump.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: