Subnet Connector
Created: September 07, 2016 | Updated: July 01, 2024
| Applies to versions: 17.0 and 17.1
Now reading version 17.0. For the latest, read: Subnet Connector for version 22
Summary
This dialog allows the designer to specify the maximum subnet separation.
Access
From the toolbar in the PCB Editor, select Route » Auto Route » Add Subnet Jumpers.
Options/Controls
- Maximum Subnet Separation - Enter a value for the maximum subnet separation (100mil is the default value) of incomplete routing segments.
- Run - Click to automatically add subnet connectors to complete short routing segments (tracks that still have connection lines in between) on the current PCB document.
Click Cancel to exit the dialog without saving changes.