Altium Designer Documentation

Clear

Using Altium Documentation
Created: July 27, 2015 | Updated: April 11, 2017
Now reading version 17.1. For the latest, read: Clear for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:

Clear


Applied Parameters: None

Summary

This command is used to remove all selected text from the current document. The selected text is totally deleted and is not copied to the clipboard.

Access

Choose Edit » Clear from the main menus.

Use

Once you have selected the text you wish to clear, simply launch the command and the selection will be removed from the document.

Tips

  1. Deletion of selected text can also be achieved using the Backspace or Delete keys.
  2. The cleared selection can be restored using the Undo command.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: